Advertisement
Step 1:
Orient the Bracket LH (1) in-line with the
Mounting Holes of the OE Bracket and slip-in
the Taper Ring M6 (11) – 1off, Screw M6 x 60
(12) – 1 off, Delrin (10) – 1off, & Rubber Spacer
(5) – 1 off, in positions as shown and secure the
threads.
The Mounting Pin (2) – 2 off can be assembled
to the Bracket. The same can be assembled Off-
line too.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
The Mounting hole, which will be used for mounting
the Brackets of the Head Light Guard, can be found on
the Front Left hand side and Right hand side.
(Shown in the drawing in Red color, is the view of it
from the Left Hand Side, when looking from the front
side of the Motorbike). The screws can be removed
and kept aside and, in its place, SRC's child part (12)
M6 x 60 must be used.
Step 2:
Repeat the Step 2 for mounting the
Bracket (RH) (9), as shown
Page 3
Advertisement
