Advertisement
Step 2:
Mounting of Rear End Bracket (2)
Orient the Rear End Bracket, as shown,
through the holes as shown, and secure
the threads, using the Screw M8x30 (4)
2 off, and the washer M8 (6) 2 off, and
secure the threads in the Motobike.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 1:
Remove the Cover already installed in
the Motorbike. This will allow access to
the Mounting Holes for fitment of SRC
Engine Guard
Page 3
Advertisement
