Advertisement
Quick Links
Scope of Supply/Bill of Material & Mounting Drawings
Part Number: H-CB500X-09-01-AL / H-CB500X-09-02-AL
Part Description: Engine Guard–HONDA CB500 X
Applicable to Finished colour versions of Silver and Black
Installation / Parts List / Bill of Material for Mounting
Copyright By SRC
Design and Specification are subjected to change
Page 1
Advertisement
Related Manuals for SRC H-CB500X-09-01-AL
Summary of Contents for SRC H-CB500X-09-01-AL
- Page 1 Scope of Supply/Bill of Material & Mounting Drawings Part Number: H-CB500X-09-01-AL / H-CB500X-09-02-AL Part Description: Engine Guard–HONDA CB500 X Applicable to Finished colour versions of Silver and Black Installation / Parts List / Bill of Material for Mounting Copyright By SRC...
-
Page 2: Mounting Drawings
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2... -
Page 3: Mounting Instructions
Mounting hole and the train of parts which has to be used for Mounting the Bracket ‘’A”. Secure the threads as shown, but not tighten it fully. Bracket “A” in “As is mounted condition”, is shown below. Copyright By SRC Design and Specification are subjected to change Page 3... - Page 4 Do not fully tighten the Bolt to the Mounting hole threads. Drawing view to the left shows the Right hand Side brackets “A” and “B” in “As is Mounted Condition”. Copyright By SRC Design and Specification are subjected to change Page 4...
- Page 5 Slip-in the Bush(6) and Orient the Bracket “C” (4) in- line with the mounting hole. Slip-in the OE bolt and secure the threads as shown, but not tighten it fully. Copyright By SRC Design and Specification are subjected to change Page 5...
- Page 6 Do not fully tighten the Bolt to the Mounting hole threads. Drawing view to the left shows the Right hand Side brackets “C” and “D” in “As is Mounted Condition”. Copyright By SRC Design and Specification are subjected to change Page 6...
- Page 7 Engine Guard in “As is mounted condition” is as shown in the drawing to the left. Copyright By SRC Design and Specification are subjected to change Page 7...
- Page 8 Ensure the Orientation visually and tighten all the screws as per torque specified in the BOM table. The Engine Guard “Final Mounted Condition” is as shown in the drawings below. Copyright By SRC Design and Specification are subjected to change Page 8...
-
Page 9: General Instructions
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.
Need help?
Do you have a question about the H-CB500X-09-01-AL and is the answer not in the manual?
Questions and answers