Page 1
22 - 24 Use Liquid Thread Locker SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
Balance of weight. Remove the 4 off Mounting Screws (Original) and Orient and Align the Bottom Bracket (5) and secure the threads in the 4 mounting points. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
M8 x 20 (10) – 1 off from either end, and secure the threads on the End Adaptor (3). The GPS Bar (2) and End Adaptor (3) are Integral (Welded together). Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5
The final mounted condition of the GPS Bar is as shown in the drawing on the left-hand side. The removed Windshield can be mounted back in its position. Copyright By SRC Design and Specification are subjected to change Page 5...
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.