Page 1
Use Liquid Thread Locker 11 Nut M6 SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
Use Liquid Thread Locker 11 Nut M6 SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
Page 4
Slide in the Mounting Pin (3) – 2 off and Grommet (2) – 2 off as shown, in the upper bracket (This can be done off-line too) Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5
Slide in the Mounting Pin (3) – 2 off and Grommet (2) – 2 off as shown, in the upper bracket (This can be done off-line too) Copyright By SRC Design and Specification are subjected to change Page 5...
Page 6
Secure the Annular groove in the grommet to the inner peripheral surface of the Head Light Guard. Visually ensure the Orientation and position of the Head Light Guard. Copyright By SRC Design and Specification are subjected to change Page 6...
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.