Fm Radio Functions; Key Functions; Receiving Fm Radio And Saving Channels - Mpio CL 100 User Manual

CL-EU-Eng1 1/8/97 8:51 PM Page 28
3

FM Radio Functions

1. Key Functions

- You cannot use the FM radio when the remote control is not connected
to the main unit.
- For direct access to the FM mode, press the FM key while a CD is
loaded.
- The CD is reloaded when the FM mode switched to the CD Playback
mode.
Key functions in the FM mode
You can easily check the key functions of remote control in FM play
mode. See the chart shown below.
The Long Key indicates pressing button for more than 3 seconds.
Channel Search mode: Changes and searches the frequency automati-
cally by using the REW/FF key.
Station Search mode: Moves between stored stations by using the
REW/FF key.
Key names Channel Search mode
Short key Long key
1. Play/Pause X
2. A<->B X Auto preset
3. FM Switching to Station
Search mode CD Playback
4. M(Menu) Starting/Finishing Switching between
menu Mono/Stereo
5. REW Decreasing 1 step in Auto Search
frequency
6. FF Increasing 1 step in Auto Search
frequency
7. Volume - Volume down Continuous volume
8. Volume + Volume up Continuous volume
9. Navigation X
28
English
FM mode
Station Search mode
Short key Long key
Power off X Power off
Mark Replay X
(A<->B)
Back to Switching to Channel Back to CD Playback
Search mode mode (reloading)
Starting/Finishing Switching between
menu Mono/Stereo
Previous station Continuous moving
to previous stations
Next station Continuous moving
to next stations
Volume down Continuous volume
down down
Volume up Continuous volume
up up
X X X

2. Receiving FM Radio and Saving Channels

* CL100 provides the functions such as Receiving FM radio, Searching
frequency band, Auto searching frequency band, Saving channels and
Saving all scanned bandwidths.
1. Receiving FM radio
1) Long press the FM key in the CD Playback mode to start the FM
Radio mode.
2) Move the multi key to the right/left (REW/FF) to select the frequency
you want.
3) Long press the REW/FF key to search the previous/next frequency
automatically.
2. Saving channels
1) Tune the frequency you want to save.
2) When tuned, press the M (Menu) key to select the menu.
3) Press the multi key vertically to
select the Channel save menu.
5) Press the multi key vertically to finish the saving process.
3. Saving all scanned bandwidths
1) Long press the A<->B key during FM reception.
2) Start scanning all FM bandwidths.
3) Save the searched frequencies in turns beginning with the station 1.
4) You can store up to 20 frequencies.
* The scan search of frequencies may be disabled in poor reception
areas. In this case, you can set frequencies manually.
4) Select a station number by mov-
ing the multi key to the right or
left.
29
English