Cd Mp3 Player Functions; Key Functions; Cd Playback And Volume Control - Mpio CL 100 User Manual

CL-EU-Eng1 1/8/97 8:51 PM Page 20
2

CD MP3 Player Functions

1. Key Functions

You can use the basic functions only on the main unit and setup the vari-
ous functions such as search and menu setup on the remote control. For
the key functions of the main unit, refer to Page 8.
Key functions in the Playback mode
You can easily check the key functions of remote control in CD
Playback mode. See the chart shown below.
The Long Key indicates pressing button for more than 3 seconds.
* Power On/Power Off
The power will be switched on when the Play/Pause key is pressed, and
the power will be switched off when the Play/Pause key is long pressed
during playback.
Key names Pause mode/Navigation mode
Short key Long key
1. Play/Pause Starting playback
2. A<->B X Starting Playlist mode
3. FM X Starting FM mode
4. M(Menu) Starting/Finishing menu
5. REW Entering to a folder
6. FF Moving to a upper folder
7. Volume - Selecting previous track Previous track (continuous)
8. Volume + Selecting next track Next track (continuous)
9. Navigation X
20
English
Playback mode
In CD playback
Short key Long key
Power off Pause Power off
Mark Replay(A<->B) X
X Starting FM mode
X Starting/Finishing menu EQ Conversion
X Previous track Rewind
X Next track Fast forward
Volume down Continuous volume down
Volume up Continuous volume up
X Starting Navigation mode Moving to a next folder

2. CD Playback and Volume Control

CD Playback
1) Connect the remote control to the main unit, and earphone to the
remote control.
2) Slide the Open Slider to the right to open the door, and insert batteries
and a music CD with its printed side facing upward.
3) Release the Hold Slider at the bottom of the main unit.
4) Press the Play/Pause key to switch the power on.
5) Select a music you want and press the Play/Pause key to start play-
back.
21
English