Changing Modes; Listening To The Fm Radio; Manually Searching The Frequency; Automatically Searching The Frequency - Mpio FY 800 User Manual

Changing Modes
Press and hold the Selection button during playback or pause mode then the player
1
will switch between Music Playback and FM Radio modes.
MUSIC
MUSIC001.m
MUSIC002.m
MUSIC003.m
Note
For music to play properly after switching from FM Radio mode to Music Playback mode,
set the Auto Play from the menu. (See page 5)
Listening to the FM Radio
The earphones work as an antenna, so connect them before using.
Press and hold the selection buttion, then it switches to Radio mode
Manually Searching the Frequency
If you press the or the button, you can change to the desired frequency.
Automatically Searching the Frequency
If you press and hold the or the
decrease for searching.
After release the button, the frequency is stopped when receiving the signal.
14
Scan
STEREO
button, the frequency is started to increase or
Note
The frequency movement unit is different depending on the menu settings FM Radio /
Seek Step. (See page 0)
Saving Channels
While listening to the FM radio, if you press the M[MENU] button, the Save Channel
1
screen appears.
The popup menu appears.
Scan Scan
CH01 : 105.50
STEREO STEREO
CH02 :
CH03 :
Select the desired channel number by pressing the + or the - button, then press the
2
or the selection button to save the frequency.
Note
Channels can also be saved in the FM Radio menu. (See page 19)
A saved radio channel cannot be deleted but you can save a new channel over a channel
that has already been saved.
You can save up to 0 channels.
Changing a Saved Frequency
You can change the saved channel to another frequency.
At a new frequency, if you press the M[MENU] button, the save channel screen ap-
1
pears.
Press the or the selection button after selecting the saved channel number.
When saving a frequency, if you have the saved frequency at a channel
2
number, the previous frequency is deleted and the new one is saved.
15