Kontron COMe-cDC2 User Manual page 91

North Bridge Configuration
Feature
DRAM Frequency
Configure DRAM Timing by SPD
Memory Hole
Graphic Device Priority
Internal Graphics Mode Select
Chipset Thermal Throttling
DT in SPD
TS on DIMM
DMI PM
91
Option
Auto
400Mhz
533Mhz
Disabled
Enabled
Disabled
15MB-16MB
IGD
PCI/IGD
Disabled
Enabled, 1MB
Enabled, 8MB
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
COMe-cDC2 / BIOS Operation
Description
Selects the DRAM frequency
Disables and Enables automatic DRAM configuration via
SPD EEPROM
Disables and Enables the incredible useless extended
memory hole
Selects which graphics adapter is initialized during boot
up and gets priority
Select the mode for the interal graphicdevice
Disables and Enables Chipset Thermal Throttling.
The GMCH supports the Delta Temperature (DT) in SPD
thermal managmeent algorithm as specified by JEDEC.
Disables and Enables the Thermal Sensor on DIMM.
Disables or Enables DMI/FSB power management. If
disabled, PCI performance will improve slightly.