Kontron COMe-cDC2 User Manual page 67

IDE Configuration
Feature
ATA/IDE Configuration
Legacy IDE Channels
Configure SATA# as
Configure SATA# Channels
Hard Disk Write Protect
IDE Detect Time Out (Sec.)
ATA(PI) 80Pin Cable Detection
67
Option
Disabled
Compatible
Enhanced
SATA only
SATA Pri, PATA Sec
PATA only
IDE
AHCI
Before PATA
Behind PATA
Disabled
Enabled
[0-35] 35
Host & Device
Host
Device
COMe-cDC2 / BIOS Operation
Description
Disables or selects the mode for the ATA/IDE interface
Selects the IDE channel behavior in compatible mode.
(Only visible when IDE is configured to Compatible
Selects the SATA mode in Enhanced IDE mode
Configure when the SATA controller is initialized in
Enhanced IDE mode
Disables/enables device write protection. It will be
effective only if device is accessed through BIOS
functions.
Selects the time out value for the detection of ATA/
ATAPI devices
Selects the mechanism for detecting 80Pin ATA(PI)
cables.