Titan TTB863MLT Manual page 29

TTB863MLT by TITAN
General operation
> Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
>
> Always hold the product on its handle/gripping surface (3). Keep the handle/
gripping surface dry to ensure safe support.
> Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
> Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete stop
before putting it down.
> Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
WARNING! Keep in mind that there are buried objects hidden in
every household! Ensure that there are no gas, water or power lines
hidden in the working area that may be hit before operation – danger
of electrical shock and serious damage to people and property! Use a
suitable detector to trace such objects in advance!
Handling
General
WARNING!
working area!
Always wear a dust mask to protect yourself against hazards resulting
> Support the workpiece properly, e. g. with clamps.
> Attach the desired tool attachment and make sure it is properly secured.
> Select a suitable revolution speed.
Operation
GB GB
IE
IE
29