Titan TTB863MLT Manual page 19

TTB863MLT by TITAN
General
> Rated voltage, frequency
> Rated power input
> Rated speed n
> Spindle thread
> Protection class
> Weight
Rated capacity
> Collet size
> max. allowable overhang of mandrel
> max. mandrel length
> max. recommended diameter of tool attachment : 35 mm
Sound values
> Sound pressure level L
> Sound power level L
> Uncertainty K
pA
Hand arm vibration values
> Vibration value a
> Uncertainty K
The sound values have been determined according to noise test code given in
EN 60745-1, using the basic standards EN ISO 3744 and EN ISO 11203.
The sound intensity level for the operator may exceed 80 dB(A) and ear
protection measures are necessary.
The declared vibration value has been measured in accordance with a standard
test method (according to EN 60745-2-23) and may be used for comparing
one product with another. The declared vibration value may also be used in a
preliminary assessment of exposure.
WARNING! Depending on the actual use of the product the vibration
values can differ from the declared total! Adopt proper measures to
protect yourself against vibration exposures. Take the whole work
process including times the product is running under no load or
switched off into consideration.
Proper measures include among others regular maintenance and
care of the product and cutting attachments, keeping hands warm,
periodical breaks and proper planning of work processes.
pA
WA
, K
WA
h
Before you start
: 220 – 240 V~ , 50 Hz
: 130 W
: max. 36000 min
M8
: II
: approx. 1.2 kg
: Ø 3.2 mm
: 20 mm
: 40 mm
: 70.7 dB (A)
: 81.7 dB (A)
: 3 dB (A)
: 2.935 m/s
2
: 1.5 m/s
2
GB
IE
-1
19