Titan TTB863MLT Manual page 23

TTB863MLT by TITAN
Inserting
WARNING!
Specialised dealers offer collets in different sizes.
>
> Press the spindle lock button (2) and hold it in position while loosening the
clamp nut (1a) with the wrench (14) (Fig. 3).
NOTE: Choose a suitable collet according to the used tool attachment.
Inspect the collet regularly for damage and wear. Replace it with a
new one of the same type if required.
> Check if the fitted collet (1b) is suitable
for the desired tool attachment, if not
remove the clamp nut (1a) and collet
(1b) from the spindle (1c). Insert a
suitable collet (1b) and refit the clamp
nut (1a) (Fig. 3).
> Insert a suitable tool attachment into
the tool socket (1) with at least 1/2 of
its shaft into the collet (1b) (Fig. 4).
> Press the spindle lock button (2) and hold it in position while tightening the
clamp nut (1a) with the wrench (14) (Fig. 5).
>
be possible to pull it out.
1
13
12
Fig. 4
A w l a s y e n s u e r
11
h t t a h t e s h a t f d
14
1b
1a
Fig. 3
14
2
Fig. 5
Before you start
a i m t e r e f o h t e o t
1c
1
GB
IE
l o
23