Titan TTB863MLT Manual page 27

TTB863MLT by TITAN
Intended use
The intended use of this product includes the use of the corresponding tool
attachment:
> rough grinding of wood, welds, plastics, leather and steel;
> abrasive cutting of hooks, nails and screws;
>
construction, optics and jewellery production etc.;
> sanding of stainless steel, welds, aluminium castings, steel, non-ferrous metals,
plastics, leather and wood;
> engraving glass, ceramics, porcelain, plastic, wood and steel;
> furthermore, working with a wire brush is possible.
This product is not suitable for large-scale material removal and bigger drill and
cutting work.
The product may be used for dry operation only without water or other cooling
liquids and should not be used in a stationary manner.
operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
Speed dial
Limit the maximum speed using the speed dial (4).
> Turn the speed dial (4) right to increase the speed (Fig. 7). A higher setting is
suitable when using tool attachments with a large diameter or working on hard
materials like wood.
> Turn the speed dial (4) left to decrease the speed (Fig. 8). A lower setting is
suitable when using tool attachments with a small diameter or working on soft
materials like plastic.
4
1
Fig. 7
Product functions
6
Fig. 8
GB GB
IE
IE
27