Wall-Mounting The Chassis - Cisco MC3810 Series Quick Start Manual

Install Chassis and Connect Cables (continued)

Wall-Mounting the Chassis

Step 1
Install the smaller brackets as shown in
the figure above.
Step 2
Attach the chassis to the wall.
• Position the end nearest the power cable
at the top
• Align screws with a wall stud, or use
wall anchors
Power supply
and fan at the top
Vertical
wall stud
Note: Screws for attaching the chassis to a wall are
not included. You need to provide four screws
suitable for your wall installation.
Caution
Do not remove the rubber feet.
They provide a space for air circulation.
3