Install Chassis and Connect Cables (continued)
1
2
3
4
5
6
E&M
E&M
E&M
E&M
E&M
FXO
Cisco MC3810
RJ-45-to-RJ-45
rollover cable
Connecting the Console Port
Note: If you are going to configure remotely, skip
this procedure and go to the next page.
If you are using a local PC or ASCII terminal to
configure your Cisco MC3810, connect it to the
console port.
Use the light-blue RJ-45-to-RJ-45 rollover cable
(included) and a terminal adapter (included):
•
RJ-45-to-DB-9 terminal adapter for a PC
•
RJ-45-to-DB-25 terminal adapter for a terminal
T1/E1
Console port
(RJ-45)
PC (laptop)
Step 1
Step 2
Step 3
When you are finished, continue to the "Connecting
the Power Cable" section on page 15.
RJ-45-to-DB-9 or
RJ-45-to-DB-25 adapter
(labeled TERMINAL)
Connect the appropriate adapter labeled
TERMINAL to the communication port
(usually labeled COM) on your PC or
terminal.
Connect one end of the cable to the
terminal adapter.
Connect the other end to the console port
(light blue) on the Cisco MC3810.
13