Wall Mounting; Table Stand - Cisco TelePresence Administrator's Manual

Isdn link
Hide thumbs Also See for TelePresence:
Table of Contents

Advertisement

Cisco TelePresence ISDN Link
Contents
Introduction

Wall mounting

If you want to mount the ISDN Link on a wall, follow the instructions below. Mount the unit with the
front panel facing up.
It is of great importance that the wall mount unit is safely installed, that the wall is able to support
the product and that the screws or mounting means used are suitable for the wall and the weight
of the product.
This type of equipment is to be installed by the submittor's/dealer's qualified installer. Installer is
responsible for obtaining safety inspection of the structural integrity of the installation by the local
authority/inspection department.
180 mm / 7.1 in
Bottom view of the unit.
D14954.01
ISDN Link Administrator Guide IL1.0, June 2012.
Copyright © 2012 Cisco Systems, Inc. All rights reserved.
Getting started
Getting started
Configuration examples

Table stand

Mount the the four foot bumpers on its feets if you would like to place the ISDN Link on a table.
Front panel
facing up.
Connectors
facing down.
9
Password protection
Appendices
Administrator guide
Contact us
www.cisco.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence isdn link

Table of Contents