More Training Functions; Interrupt Training; Evaluation Of The Training Data Using Software; Sigma Ride App - VDO Cyclecomputing R4GPS Manual

More training functions

Interrupt training

If you would like to interrupt the training for a longer period of time, e.g. for a longer lunch break, you can switch off the R4 GPS.
To do this, open the quick menu (in AutoPause or while training is in progress) and select the "Switch off" menu item.
To wake up the device and continue training, switch it on as usual. You can also turn off the device when your exercise is stopped.
As long as the data is not reset by long pressing the + button, you can continue the current training.
ATTENTION: If a training session is continued over several days, the date of the last day is only written at the end. If you connect the R4 GPS to the PC during this period,
the training session will be closed.

Evaluation of the training data using software

SIGMA RIDE App

With the SIGMA RIDE app you can carry out an extensive evaluation of your training data. Different training parameters, graphics, etc. are displayed for each training unit.
You can also export your training data to third-party portals directly from the SIGMA RIDE app. Please refer to the sharing menu of the app to find out which portals are
available for this. To view previous training units, switch to the activity list and select the relevant unit.

Third party providers

The training data of the R4 GPS is available as a .FIT file. Therefore all portals that use this standard
can read the data of the R4 GPS. You can export to relevant third-party providers using the SIGMA RIDE app.
If the portal you want is not available for automatic synchronization, you also have the option of uploading
the .FIT files directly to the third-party provider. To do this, you have to connect the R4 GPS to the PC via
a USB-C cable. The training data can then be found in the Activities folder.