Table of Contents
Advertisement
SELEC TING TH E C H AN NE L MO DE
Unity provides two different channel modes to determine how received DMX input values
are mapped to the various emitter colors.
Note: The channel mode can also be configured via RDM, see page 38.
7 C HANN EL
Allows you to control the five emitter colors individually or alternatively to choose a
particular color temperature of white. An intensity channel is provided.
Mixing colors individually
Use channels 1 to 5 to mix the required
shade.
Use channel 7 to determine the overall
output intensity.
Note: Channel 6 must be at zero.
Choosing a temperature of white
Use channel 6 to select the required
correlated color temperature (CCT),
ranging from 2500K (at 1%) to 8000K
(at 100%). See page 44 for a full list
of color temperatures and the DMX
input values required at channel 6.
Use channel 7 to control the overall
output intensity.
Note: When channel 6 receives any value other than
zero, the input values of channels 1 to 5 will be ignored.
5 C HANN EL
Allows you to mix the required shade
using the five distinct emitter colors.
No intensity channel is used.
TO SELEC T THE CHA NNEL MODE
1 Enter the user menu (see page 26).
2 Use the
or
currently selected mode will be shown.
3 Press
and then use the
ENTER
4 Press
ENTER
to set the displayed mode.
30
buttons to locate the Channel Mode option and press
or
buttons to show the required mode.
ENTER
. The
Advertisement
Table of Contents
