Error Code Description - Imperx Cheetah 3G-SDI User Manual

Cheetah Pregius Camera User Manual | 3G-SDI Interface

Error Code Description

To manage camera reliability, use the following not-acknowledge error codes:
x00 – No error
x01 – Invalid command. An invalid command (not 52 or 57) sent to the camera.
x02 – Time-out
x03 – Checksum error
x04 – Value less than minimum
x05 – Value higher than maximum
x06 – AGC error
x07 – Supervisor mode error
x08 – Mode not supported error
April 14, 2021 Page
72 of 99
Rev 1.4