Imperx Cheetah 3G-SDI User Manual page 91

Cheetah Pregius Camera User Manual | 3G-SDI Interface
4. Browse for either the edited .dpm file or .hpm file, select it, and click Upload.
Wait for the upload to finish.
5. After the upload is completed, do a power cycle on the camera.
6. After the camera re-starts, run CamConfig and open Image Control screen.
7. Make sure that DPC or HPC is set to Static so that the camera uses the maps you loaded.
8. Retake images as described in the
ensure all defective and hot pixels are now corrected.
April 14, 2021
Finding Dead Pixels and Finding Hot Pixels
Page
91 of 99
sections to
Rev 1.4