Table of Contents
Advertisement
Cheetah Pregius Camera User Manual | 3G-SDI Interface
3. Browse for the .lut file, select it, and click Upload.
Select to which camera's LUT (LUT1–LUT4) to upload the .lut file you created.
Wait for the upload to finish.
4. After the upload is completed, do power cycle the camera.
5. After the camera re-starts, start the software GUI and select Data Correction.
6. Set LUTEnable to the LUT you uploaded.
The camera then uses the LUT you uploaded.
April 14, 2021
Page
99 of 99
Rev 1.4
Advertisement
Table of Contents
