Assembling; Installing The Filter Holder; Installing The Fluorescence Filters; M-797 - Optika Italy IM Series Instruction Manual

8.

Assembling

8.1 Installing the filter holder
1. Unscrew the screw ① on both side of the microscope to re-
move the plastic covers ②. (Fig. 1)
2. Unscrew the three screws ③ holding the plate on the micro-
scope body. (Fig. 2)
3. Insert the filter holder (either 2 positions or 4 positions) in the
microscope, with the "L" facing the back side of the micro-
scope. (Fig. 3)
4. Fix the filter holder by screwing the three screws ③, removed
before from the plate.
8.2 Installing the fluorescence filters

8.2.1 M-797

Insert the filter cubes by sliding them from the sides of the micro-
scope: B from the left and G from the right. (Fig. 4)
• Pay attention to install the filter cubes with the emission
filter facing down.
Page 9
②
①
③
③
③
F ig. 1 F ig. 1
F ig. 2 F ig. 2
③
F ig. 3 F ig. 3
F ig. 4 F ig. 4