Installing The Lamp Housing; Installing The Bulb - Optika Italy IM Series Instruction Manual

8.6

Installing the lamp housing

Insert the lamp house and fix it with the Allen screw ①. (Fig. 9)
8.7

Installing the bulb

1. Open the lamp housing using the door lock screw
remove the lamp holder. (Fig. 10)
2. Remove the plastic block
exhausted lamp in case of replacement) by loosening the two
④
locking screws . (Fig. 11)
3. Insert the mercury bulb ⑤ (respect the polarity of the bulb),
tighten the locking screws and refit the lamp holder inside the
lamp housing. (Fig. 12)
• Do not touch the bulb with bare hands.
③
from the lamp holder (or the
②
and
Page 11
①
F ig. 9 F ig. 9
②
F ig. 10 F ig. 10
④
③
④
F ig. 11 F ig. 11
⑤
F ig. 12 F ig. 12