ED2400 & ED2400(A) Series Surface Vertical Rod
Exit Devices
Installation Instructions
2
General Information, continued
Change Hands
a
Remove four (4) screws and
vertical lifter assembly. Rotate
device to opposite hand (180˚).
Insert lifter assembly under
lift block and re-install screws.
Note
Lifter must fit under lift block as
shown. ( 1)
b
1/4-20 Sex Nut Option
Device
Quantity
No trim
8
With trim
6
Recommended for wood
composite or unreinforced
metal doors. (Figure 2)
c
Rod Extension Options
• 2" (51 mm)
• 6" (152 mm)
• 12" (305 mm)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
RHR Device
Vertical lifter
(4) 8-32 x 3/16" PRHMS
RHR Door
LHR Door
Figure 1
Size
1/4 - 20
Figure 2
Figure 3
Lift block
assembly
Note
Standard for Fire
Rated doors.
5
LHR Device
Vertical lifter
assembly
(4) 8-32 x 3/16" PRHMS
FM572 10/22