Buffalo TeraStation 3000 User Manual page 90

7
Click Add.
Note: If you want to back up to a Buffalo NAS device on another network, follow the procedure below to add
the Buffalo NAS device on another network before selecting the backup folders.
(1) Click LinkStation and TeraStation List.
(2) Click Add under "Off-subnet Devices", enter the IP address or hostname of the destination Buffalo NAS
device, and click Refresh. Make sure that the desired Buffalo NAS device is added to the "Detected
LinkStations and TeraStations" list.
(3) Click Close when finished.
8
Click Browse under "Backup Source Folder Name".
9
Select the shared folder that will be the backup source, then click OK.
10
Click Browse under "Backup Target Folder Name".
89