Buffalo TeraStation 3000 User Manual page 212

Notes:
• The default gateway in the "Network Settings" field will only affect LAN port 1; the DNS server addresses will
affect both LAN ports 1 and 2. If you change the DNS server address on either IP address settings page, it will
affect the other LAN port as well.
• Do not set the IP address of the same segment for LAN port 1 and LAN port 2. This may cause unstable network
communication.
• Use LAN port 1 to access different network subnets from the TeraStation. Access to a different network subnet is
not possible from LAN port 2 since it doesn't have a default gateway.
• The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize all settings with the init button on the TeraStation.
Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255
211