Buffalo TeraStation 3000 User Manual page 73

2
Click to the right of "iSCSI".
3
Click the volume to enable access restrictions.
4
Enable authentication, enter the target CHAP name and secret, and click OK.
Note: To enable mutual authentication, select the "Enable" checkbox to the right of "Mutual Authentication"
and enter the initiator CHAP secret.
5
Click OK.
Connecting to Individual Volumes that Are Access-Restricted
Using Microsoft iSCSI Initiator
1
Open the Microsoft iSCSI Initiator.
2
Register the initiator CHAP secret to your computer first. If you didn't enable mutual authentication, skip this
step.
Click CHAP on the Configuration tab. Enter the configured initiator CHAP secret into the "Initiator CHAP secret"
field and click OK.
3
From the Discovery tab, click Discover Portal.
4
Enter the TeraStation's IP address into the "IP address or DNS name" field.
5
Click Advanced.
72