Buffalo TeraStation 3000 User Manual page 194

2
Click to the right of "SNMP".
3
Click Edit.
4
Select whether to use SNMP version 2 or version 3.
5
Configure the desired settings, then click OK.
6
Move the SNMP switch to the
7
SNMP has been configured for the TeraStation. For further use, configure your SNMP-compatible network
management software using the Buffalo-specific MIB (management information base) file. The MIB file is
available from the Buffalo website.
Depending on which SNMP client software you use, the procedure for configuring the software will differ. For
more detailed information on configuring the client software, refer to its help or included manual.
position to enable SNMP.
193