Creating A New Account - Project EV EVA-07S-S User Manual

Project EV Standard App

Creating a new account

32
Firstly, if you have not done so already, you will need to create a unique account for yourself.
Select register on the top right of the app and follow the required fields. These are de-noted
with a * next to them. If an installer details are unknown, please state unknown as they are a
required field. Once all the fields have been completed, read and tick the user agreement
before pressing register.
Installer details are used by Project EV to give assistance to installers, and to contact them
should an issue be raised. This could be installation based and not charger hardware issues.
Installer Top Tip:
If you are installing Project EV chargers regularly, set your own account up to commission
the chargers - when completed simply delete the charger from your app and add to the
customer account - All the settings entered are transferred over!
25
(5). Select "Use the following IP address" and enter the IP address, Subnet Mask,
Default Gateway. Click OK and close the Local Area Connection properties window.
Please note: After res
charger ID and server