Project EV EVA-07S-S User Manual page 18

Configuring a laptop
for commissioning
Setting the laptop for a static IP.
s
4GHz
nect
e the
The Charger's default IP address is 192.168.1.5. To access the parameter setting interface,
you'll need to first set the computer's IP to 192.168.1.3
To set a static IP on your Windows computer:
1. Click Start Menu > Control Panel > Network and Sharing Center. (For Windows 8 and
higher, search for and open Control Panel and select Network and Internet).
2. Click Change adapter settings.
3. Right-click on Local Area Connection Ethernet and click on properties.
7.4 Cannot access parameter setting page
a. Check if you have connected the charger to your computer,
b. Check if you have changed the computer's IP to 192.168.1.x (x can be any value
between 1 and 255 except 5).
To set a static IP on your Windows computer:
(1). Click Start Menu>Control Panel>Network and Sharing Center. (For Windows 8 and
higher, search for and open Control Panel and select Network and Internet).
(2). Click Change adapter settings.
(3). Right-click on Local Area Connection and click on Properties.
(4). Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
31
c. Check which web b
Chrome cannot be us
d. Check if you have in
address eld, do not l
e. You may need to re
f. If you have changed
can restore the charg
Then you can access
17