Grounding Methods - Cleanfix Sparrow Safety, Operation & Maintenance Manual

CARE OF THE EXTRACTOR
This extractor is designed to be safe when used to
perform cleaning functions as specified. Should
damage occur to electrical parts, the unit should
NOT be used until the damage is repaired by the
manufacturer of an authorized service center. This
will avoid further damage to the extractor or injury
to the user.
GROUNDING INSTRUCTIONS - 120 VOLT
Electrical equipment must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electric shock.
The extractor is equipped with a cord having
equipment grounding conductor and grounding
plug.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is
Do not modify the plug provided with the equipment. If it will not fit the outlet, have a proper
Note: In Canada, the use of a temporary adapter is not permitted by the

GROUNDING METHODS

This electric equipment is for use on a nominal
120-volt circuit, and has a grounded plug that looks
like the plug illustrated in (Fig. A). A temporary
adaptor that looks like the adaptor illustrated in
(Fig. B & C) may be used to connect this plug to a
2-pole receptacle as shown in (Fig. B) if a properly
grounded outlet is not available.
SAVE THESE INSTRUCTIONS!
WARNING
properly grounded.
outlet installed by a qualified electrician.
Canadian Electrical Code.
Safety, Operation and Maintenance Manual for Spotter; Version 1.2
These instructions are for your protection and
information.
PLEASE READ CAREFULLY! Failure to follow
instructions or precautions could result in injury or
damage to the user and/or the extractor.
The plug must be inserted into an appropriate outlet
that is properly installed
accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is
necessary, DO NOT connect the grounded wire to
either flat blade terminal. The wire with insulation
having an outer surface that is green with or without
yellow stripes is the grounding wire.
The temporary adaptor should be used only until a
properly grounded outlet (Fig. A) can be installed
by a qualified electrician. The green color rigid ear,
lug or the like extending from the adaptor must be
connected to a permanent ground such as a
properly grounded outlet box cover. Whenever the
adaptor is used, it must be held in place by a metal
screw (Fig. C).
Improper use of the
grounding plug can
and grounded
DANGER:
result in a risk of
electrical shock.
in
3