Getting Started; Power On; Power Off - NewLine Q+ Series User Manual

3.1 Power On

Step 1 Ensure the power cable is fully seated into the panel and wall outlet before powering on the
panel. Please confirm your wall outlet supports a power range of 100V to 240V with
frequency at 50 Hz/60 Hz ± 5% and is fully grounded.
Step 2 Flip the power switch located on the side of the product to "I".
65" / 75" / 86"
(tips
Step 3 Press the power button

3.2 Power Off

Press the power button
control to enter sleep mode. Long press the power button
button
Step 1 If there is no whiteboard data or screenshot(s), long press the power button
the panel.
Step 2 If there is whiteboard data or screenshot(s), long press the power button
panel or on the remote control. The Save session page will be displayed as shown in the
following figure.
The power outlet should be installed near the equipment and should be easily accessible.
：
Image to be updated)
on the remote control to turn off the panel in the following situations:
3
on the front control panel or
on the front panel or the power button
23

Getting Started

on the remote control.
on the remote
on the front panel or the power
on the front
to power off