NewLine Q+ Series User Manual page 27

Step 5 Select Touch input from the option and start calibration.
Step 6 Use your finger or a pencil to click and hold the center of the flickering cross
release until
instructed.
Step 7 After the calibration is complete, the Digitizer Calibration Tool dialog box will be
displayed. Click Yes to save calibration data.
To ensure writing accuracy, use the pencil or stylus included with the product for proper positioning.
⚫
Positioning errors may cause failure of touch functions of the display. In that case, please perform
⚫
calibration again.
Step 8 The Tablet PC Settings dialog box will be displayed again. Tap OK. The calibration will be
complete.
moves to the next positioning point. Complete the calibration process as
27
. Do not