NewLine Q+ Series User Manual page 8

⚫ Do not install the product on carpet or cloth.
⚫ Do not use a cloth such as table cloth to cover the product.
Keep the product away from the radio.
The product complies with the international EMI standard to prevent radio interference.
However, interference may still exists and causes noise in the radio. If noise occurs in the radio,
try the following solutions.
⚫ Adjust the direction of the radio antenna to avoid the interference from the product.
⚫ Keep the radio away from the product.
If the screen glass is broken or falls off.
⚫ Keep all personnel 10 feet away from the screen to ensure safety.
⚫ Do not perform any installation or disassembly while the screen glass is broken or has fallen
off.
Use the battery correctly.
⚫ Galvanic corrosion, electric leakage, and even fire may be caused by improper battery usage.
⚫ It is recommended to use the designated type of battery and install the battery by the correct
electrodes (positive and negative).
⚫ Do not install and use a new battery with a used one.
⚫
Take out the battery if the remote control is not used for a long period.
⚫ Do not expose the battery to overheated environments, such as sunlight and or heat sources.
⚫ Dispose of the used battery based on your local regulations.
Do not damage the power cable.
⚫
Do not damage, change, twist, bend, or forcibly drag the power cable.
⚫ Do not put weights (such as the product itself) on the power cable.
⚫ Do not forcibly drag the cable when you pull out the power plug. If the power cable is
damaged, please contact the local distributor to repair or replace it.
⚫
The power cable in the accessory box is for this product only. Do not use it on other products.
Additional advice:
⚫
Use the product in an environment with comfortable lighting. It is harmful to your eyes to
watch in a too bright or too dark environment.
⚫ Relax your eyes watching for a period of time.
⚫ Keep sufficient distance from the product to protect your eyes and prevent eyestrain.
⚫
Adjust the volume to an appropriate level, especially at night.
About USB port.
Front USB ports and rear USB 3.0/USB 2.0 ports switch connections based on signal sources. If
the current signal source is reading the data from an external product connecting to the port,
please switch the signal source after the data reading is complete. Otherwise, the data or product
may be damaged.
CAUTION
8