Power On
Ensure the power cable is fully seated into the panel and wall outlet before powering on the panel. Please confirm
your wall outlet supports a power range of 100V to 240V with frequency at 50 Hz/60 Hz ± 5% and is fully
grounded.
The power outlet should be installed near the equipment and should be easily accessible.
Flip the power switch located on the side of the product to "I".
65" / 75" / 86"
Press the power button
Power Off
Press the power button
panel in the following situations:
If there is no whiteboard data or screenshot(s), press the power button
the panel.
If there is whiteboard data or screenshot(s), long press the power button
control. The Save session page will be displayed as shown in the following figure.
on the back panel or
on the back panel or the power button
on the remote control.
on the remote control to turn off the
and then tap Turn off to power off
on the back panel or on the remote
21
Getting Started