ATEN CL5708IM User Manual page 127

Setting
Scan Duration
Screen Blanker
Logout Timeout
Toolbar
Viewer*
Welcome
Message*
Save
Changing a
Password
* This item is only available with the Browser version.
Determines how long the focus dwells on each port as it cycles
through the selected ports in Auto Scan Mode (see Auto
Scanning, page 172). Key in a value from 1—255 seconds. The
default is 5 seconds; a setting of 0 disables the Scan function.
If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1—30
minutes. A setting of 0 disables this function. The default is 0
(disabled).
Note: Although this function can be set from either the local
console or a remote login, it only affects the local console monitor.
If there is no user input for the amount of time set with this
function, the user is automatically logged out. A login is necessary
before the KVM over IP switch can be accessed again.
Selects whether or not the Port Toolbar is enabled when a port is
accessed (see The Port Toolbar, page 170 for details).
Since the Toolbar functions are also available from the GUI
Control Panel (see The Control Panel, page 70), you may prefer
to disable it here.
You can choose which viewer is used when accessing a server:
Auto Detect will select the appropriate viewer based on the
web browser used; WinClient for Windows Internet Explorer,
Java Client for other web browsers (ex. Firefox).
Java Client will open the Java based viewer regardless of the
web browser being used.
You can choose to hide or show the welcome message displayed
in the submenu bar. The default is disabled.
Click Save to save any changes made to the User Preferences
settings.
In the Browser GUI, to change a user's password, key in the old
password and new password into their input boxes; key the
new password into the Confirm input box, then click Change
Password to apply the change.
In the AP GUI version, click Change Password; key in the old
password and new password into their input boxes; key the
new password into the Confirm input box, then click Save.
Chapter 8. Port Access
Function
111