Field Controls CUV Series Manual

Uv-aire air purifying system

Advertisement

Quick Links

UV-AIRE AIR PURIFYING SYSTEM
Model: CUV AND DUV SERIES
AIR DUCT MOUNTED ACCESSORY
WITH RESPECT TO ELECTRICAL SHOCK,
FIRE AND CASUALTY HAZARDS ONLY
E524561
The UV‐Aire unit is designed to emit High Output UVC Wavelength light rays which inactivate and sterilize
airborne microorganisms as they pass through a HVAC system or ductwork. The UV-Aire Purifying System
models have been designed for use as coil irradiation and/or for air disinfection.
This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or
condition, nor for use in the mitigation, treatment or prevention of any disease or condition.
The aspects associated with the use of this product and its ability to aid in disinfection of environmental air
have not been investigated by UL.
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
This device MUST be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition
This device MUST be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition
of a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged
of a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the
precautions required, and has complied with all the requirements of the authority having jurisdiction.
precautions required, and has complied with all the requirements of the authority having jurisdiction.
Installed By:
ITEMS INCLUDED IN SYSTEM:
Please retain these instructions after installation.
Phone:
www.fi eldcontrols.com
Magnetic Mount Power Enclosure
Lamp Support Rod(s)
Ultraviolet Lamp(s)
Access Panel Warning Label
Instruction Manual
Tie Wraps
Lamp Install Label
Lamp Cleaning Kit
Installation Date:
P/N 780108800 Rev A 10/22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CUV Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Field Controls CUV Series

  • Page 1 UV-AIRE AIR PURIFYING SYSTEM Model: CUV AND DUV SERIES ITEMS INCLUDED IN SYSTEM: • Magnetic Mount Power Enclosure • Lamp Support Rod(s) • Ultraviolet Lamp(s) • Access Panel Warning Label AIR DUCT MOUNTED ACCESSORY WITH RESPECT TO ELECTRICAL SHOCK, • Instruction Manual FIRE AND CASUALTY HAZARDS ONLY •...
  • Page 2 (THIS PAGE LEFT INTENTIONALLY BLANK) P/N 780108800 Rev A 10/22 page 2 of 20...
  • Page 3: Safety Considerations

    SAFETY CONSIDERATIONS Understand the signal words DANGER, WARNING, and CAUTION. These words are universally used for overall safety. DANGER identifi es the most serious hazards which will result in severe personal injury or death. WARNING signifi es hazards which could result in personal injury or death. CAUTION is used to identify unsafe practices resulting in minor personal injury or product and property damage.
  • Page 4: Considérations De Sécurité

    CONSIDÉRATIONS DE SÉCURITÉ Comprenez les mots indicateurs DANGER, AVERTISSEMENT et PRUDENCE. Ces mots sont universellement utilisés pour la sécurité globale. DANGER identifi e les dangers les plus graves qui entraîneront des blessures corporelles graves ou la mort. AVERTISSEMENT signifi e les dangers qui pourraient entraîner des blessures corporelles ou la mort. LA PRUDENCE est utilisée pour identifi...
  • Page 5 INSTALLATION AND OPERATION The UV‐Aire models consists of 4 main components: Magnetic Mount Power Enclosure, Lamp Support Rod(s), Ultraviolet Lamp(s), and generic product kit. Magnetic Mount Power Enclosure The Magnetic Mount Power Enclosure is designed to directly mount to any steel metal surface. This enclosure is equipped with fl anged end plates for mechanical screw fasteners, if desired.
  • Page 6 CAUTION: Verify all fastener hardware is tight during installation. LA PRUDENCE: Vérifi ez que tout le matériel de fi xation est étanche lors de l’installation. The lamp Support Rod is designed to directly mount to any steel metal surface. The L‐bracket design incorporates several additional mounting holes for alternative mechanical screw fastener mounting method.
  • Page 7 CAUTION: Do NOT insert/secure UV lamp on glass portion of lamp to Inverted U‐Shaped lamp support bracket. Could damage or break lamp glass. LA PRUDENCE: N’insérez PAS / fi xez la lampe UV sur la partie en verre de la lampe sur un support de lampe en forme de U inversé.
  • Page 8 Generic Product Kit The Generic Product Kit contains the instruction manual, tie wraps, access panel warning label, UV Lamp installation label and lamp cleaning kit. Use the lamp cleaning kit which consists of an alcohol pad to wipe down the UV lamp, if you touch lamp glass surface with your hand or body.
  • Page 9 Diagram 1: Electrical Wiring Schematic for xUV-11xxxx Model Product P/N 780108800 Rev A 10/22 page 9 of 20...
  • Page 10 Diagram 2: Electrical Wiring Schematic for xUV-15xxxx Model Product P/N 780108800 Rev A 10/22 page 10 of 20...
  • Page 11 Figures 7, 8 and 9 show examples of UV-Aire Air Purifying System series product installed in Roof Top Mount HVAC system. Figures 10, 11 and 12 show examples of product installed in HVAC ductwork. These examples are not provided to be all exclusive and limited to but to assist the installer with where and how to install this product.
  • Page 12 Figure 9: Generic Example of Rooftop HVAC Return Air Side Installation Figure 10: Generic HVAC Ductwork Installation (Horizontal Rod Support) P/N 780108800 Rev A 10/22 page 12 of 20...
  • Page 13 Figure 1 1: Generic HVAC Ducted Installation (H Style Rod Confi guration: Vertical Rod Support with Horizontal Lamp) – Requires Additional Lamp Support Kit with EMT Conduit Mounting Brackets and Inverted U‐Shaped Backets Installed in Alternative Rotated Orientation for Installation Figure 12: Generic HVAC Ducted Installation (H Style Rod Confi...
  • Page 14 EMT Conduit Magnetic 1/2” EMT Conduit Inverted U-Shaped Mounting Bracket (6” Longer than Lamp length) Lamp Bracket Figure 13: Single Lamp Support Rod Assembly for Single/Dual Lamp Models (Standard) Inverted U-Shaped EMT Conduit Magnetic 1/2” EMT Conduit Lamp Brackets Mounting Bracket (6”...
  • Page 15 Figure 15: EMT Conduit Bracket Assembly Figure 16: EMT Tri-Foot Magnet Conduit Bracket for 18” thru 34” UV Lamp Lengths Assembly for 38 thru 58” UV Lamp Lengths Standard Confi guration for EMT Conduit Bracket Assembly is what is supplied from factory for all rod assemblies with UVC lamp lengths of 18” thru 34”...
  • Page 16 Figure 20: : EMT Tri-Foot Magnet Partial Assembly (Exploded View) OUTDOOR MOUNTING KIT When installing Magnetic Mount Power Enclosure outdoors, order the Outdoor Mounting Kit (refer to Fig- ure 21). The outdoor mounting kit is an optional accessory kit designed protect lamp cables from accidental damage and provides a bracket...
  • Page 17: Installation Steps

    OPTIONAL STATUS DISPLAY MODULE The optional Status Display Module kit is available for xUV-15xxxx models only and provides a multi-purpose interface with the operational conditions of UV-Aire system. The display module can be used to interface with building automation control and maintenance network systems. Refer to the status display module manual included with optional accessory for specifi...
  • Page 18: Troubleshooting Guide

    Inspection Procedure Remove Access Panel to: 1. Inspect all cables for breakdown and wire fraying. 2. Inspect Lamp Support Rod. a. Verify hardware is not loose b. Verify lamps are secured in place over plastic/ceramic section of lamp with inverted U-Shaped bracket.
  • Page 19 REPLACEMENT AND SPARE PARTS LIST: Field Controls P/N: Model Description Used on Model(s) 602610617 CUVL-18N 17.5 UVC Lamp Non-Coated (1) xUV-1 1 18xN 602610623 CUVL-23N 23” UVC Lamp Non-Coated (1) xUV-1 123xN 602610628 CUVL-28N 28” UVC Lamp Non-Coated (1) xUV-1 128xN...
  • Page 20: Warranty

    This manual may be downloaded and printed from the Field Controls website (www.fi eldcontrols.com) This manual may be downloaded and printed from the Field Controls website (www.fi eldcontrols.com) WARRANTY WARRANTY For warranty information about this or any Field Controls product, visit: For warranty information about this or any Field Controls product, visit: www.fi eldcontrols.com...

This manual is also suitable for:

Duv series

Table of Contents