Table of Contents Installation & Maintenance Instructions Air Purifi cation System Table of Contents Important Safety Instructions ......... . 1 Specifi...
NOTE: In the event, the existing thermostat does not have the capability to operate the air-handler fan unit independently of a demand for heating or air-conditioning, it is highly recommended to install the Field Controls Healthy Home System Control PLus (HHSC+) programmable ventilation system.
Page 5
FIG 2 FIG 1 CHANGING THE UVC GERMICIDAL LAMPS 1. Unplug the power cord from the Trio 1200/2000 Healthy Home Purifi cation System. Unscrew the two locking knobs and remove the door. (Fig. 3) 2. Remove Photocatalytic module. (Fig. 4) 3.
An optional feature of this APP can be confi g- ured to notify your HVAC contractor. Refer to Field Controls Healthy Home iAQ APP – Filter and UV Lamp Tracking instruction sheet (doc: 78010001000). This document is available on the Field Con- trols Web Site (www.FieldControls.com).
FOR REPLACEMENT OF FILTER AND UVC GERMICIDAL LAMPS Contact your local HVAC contractor INSTALLATION Make sure to install the Trio 1200/2000 Healthy Home Purifi cation System so that the inlet or return air enters the side containing the MERV13 particulate reduction cartridge fi rst. 1.
Page 8
FIG 8 FIG 9 5. Seal all seams with an approved air duct sealant between the air handler and the outlet side of the Trio1200/2000 so that there can be no air bypassing the system. 6. Attach the air handler to the outlet side of the Trio 1200/2000 and fasten with #10 x 3/8 self-drilling sheet metal screws.
Page 9
Designed in accordance with UL 1598 and CAN/CSA C22.2 page 9...
WIRING DIAGRAM FIG 10 - Electrical Diagram PRODUCT LABEL PLACEMENT Label is shipped in bagged parts seperately and should be placed on unit as noted below. page 10...
Page 11
* Denotes transformer installed on product shipped prior to 2016. page 11...
Need help?
Do you have a question about the Healthy Home System and is the answer not in the manual?
Questions and answers