Table of Contents
Advertisement
Quick Links
InnoColor
Beam12
User Instructions
Rev. 3/14
Inno Color Beam 12
Unpacking:
Thank you for purchasing the Inno Color Beam 12 by
American DJ
. Every Inno Color Beam 12 has been thoroughly tested
®
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your fix-
ture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts
are missing, please contact our toll free customer support number for
further instructions. Do not return this unit to your dealer without first
contacting customer support.
Introduction:
The Inno Color Beam 12 is part of American DJ's con-
tinuing pursuit for creating high quality affordable intelligent fixtures.
The Inno Color Beam 12 is a compact, high performance, DMX intel-
ligent, moving head, LED fixture. This fixture is a great piece for retail
stores, displays, mood, architectural, interior and exterior decoration,
and clubs. This unit can be used as a stand alone, or in a Master/Slave
configuration. The unit can also be controlled via DMX controller. This
fixture is suitable for theaters, studios, retail stores, and other similar
locations.
Customer Support:
American DJ
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
.
®
PLEASE recycle the shipping carton when ever possible.
American DJ Supply
- www.americandj.com - Inno Color Beam 12 User Manual Page 2
©
®
Introduction
provides a toll free customer sup-
®
Advertisement
Table of Contents
Related Manuals for ADJ InnoColor Beam12
Summary of Contents for ADJ InnoColor Beam12
- Page 1 Inno Color Beam 12 Introduction Unpacking: Thank you for purchasing the Inno Color Beam 12 by American DJ . Every Inno Color Beam 12 has been thoroughly tested ® and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during ship- InnoColor ping.
-
Page 2: General Instructions
Inno Color Beam 12 General Instructions Inno Color Beam 12 Safety Precautions To optimize the performance of this product, please read these operat- • To reduce the risk of electrical shock or fire, do not expose this unit ing instructions carefully to familiarize yourself with the basic operations rain or moisture of this unit. - Page 3 Using a cable terminator of 1, the DMX controller knows to send DATA assigned to address 1 (ADJ part number Z-DMX/T) will decrease the possibilities of erratic to that unit, no matter where it is located in the DMX chain.
- Page 4 Inno Color Beam 12 System Menu Inno Color Beam 12 System Menu ADDR - DMX Address Setting via control board - 1. Press the MENU button until “ADDR” is displayed, press ENTER. 2. “X” will now be displayed, “X” represents the displayed address. Press the UP or DOWN buttons to find your desired address.
- Page 5 Inno Color Beam 12 System Menu Inno Color Beam 12 System Menu 2. “SH X” will now be displayed, “X” representing a number unit will automatically go into the last DMX set up. between 0-4. Shows 1-4 are preset shows, while “SH 0” is random 3.
- Page 6 Inno Color Beam 12 System Menu Inno Color Beam 12 System Menu TEDT 2. When “DISP” is displayed the LED display will remain normal, - With this function you can check the LED tempera- when “DSIP” is displayed, the LED display will be “flipped”. ture.
-
Page 7: Master Dimmer
Inno Color Beam 12 Universal DMX Control Inno Color Beam 12 9 Channel Mode Channel Value Function Universal DMX Control: This function allows you to use a Elation ® 0 - 255 PAN 0° - 540° universal DMX-512 controller to control the chases and patterns, dimmer and strobe. - Page 8 Inno Color Beam 12 16 Channel Mode Inno Color Beam 12 16 Channel Mode Channel Value Function Channel Value Function 0 - 255 PAN 0° - 540° SHUTTER/STROBING 0 - 255 PAN FINE 0 - 7 BLACKOUT 0 - 255 TILT 0°...
-
Page 9: Photometric Chart
Inno Color Beam 12 Photometric Chart Inno Color Beam 12 Fuse Replacement Locate and remove the unit’s power cord. Once the cord has been removed located the fuse holder located inside the power socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse holder. -
Page 10: Warranty
Inno Color Beam 12 Warranty Inno Color Beam 12 Specifications MANUFACTURER’S LIMITED WARRANTY SPECIFICATIONS: American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American Voltage: 100V~240V 50Hz/60Hz Audio products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse).