Part Name; Control Names; Function - Mitsubishi Diamond Pro 710 User Manual

2

PART NAME

2
2.1

Control Names

See Figures 3 and 4 for the location of the user controls,
indicator and connectors.
Each part is identified by number and is described individu-
ally.
FRONT
Figure 3
2.2

Function

1. POWER SWITCH: A push-on / push-off switch for AC
power.
2. POWER-ON INDICATOR: This indicator illuminates
green when AC power is on, and illuminates red
when the monitor is in the power management
modes.
3. FPM (FINE PICTURE MODE): Push to turn FPM on
and off. The normal(default) status is "off", but turning
this function "on" may improve camera type image
renderings. Select the status which provides the most
pleasing image.
Note that only standard color is selected when FPM is
on.
4. DOWN BUTTON: Push to select group icon.
5. ITEM SELECT BUTTON: Push to select the item
icon to be adjusted.
6. FUNCTION ADJUST BUTTONS: Push the adjust
buttons to adjust the function that has been selected
by the down button and item select button.
REAR
7. AC POWER CONNECTOR
8. SIGNAL CABLE
9. SIGNAL INPUT CONNECTOR (DB9-15P)
- 5 -
Figure 4