Technical Data - Meec tools 013150 Operating Instructions Manual

EN
– eye injuries if safety glasses are not used
– vibration injuries if the tool is used for long periods, or is not
used or maintained properly.
VIBRATION
• Declared total vibration values have been measured in accordance
with a standard test method, and can be used for comparisons
between tools. The declared values can also be used for a
preliminary assessment of exposure.
• Vibration levels can deviate from the declared value, depending on
how the product is used.
• Try as far as possible to reduce exposure to vibrations by, for
example, wearing gloves and taking suitable breaks at regular
intervals in the work.
• The product generates an electromagnetic field when in use. This
field can in some circumstances affect active or passive medical
implants. If you have a medical implant you should consult your
doctor and/or the manufacturer of the medical implant before using
the product to reduce the risk of serious or fatal personal injury.
REDUCTION OF NOISE AND VIBRATIONS
• Plan the work so that exposure to heavy vibrations is spread over a
longer period.
• To reduce noise and vibrations when in use, limit the time the
product is used, and use low-power/vibration and noise mode and
suitable safety equipment.
• The product is noisy. Do not use the product in the early morning or
late evening.
• Take the following precautions to minimise the risks of exposure to
vibrations and/or noise:
– Only use the product in accordance with these instructions.
– Check that the product is in good condition.
– Use accessories in good condition, and which are suitable for
the purpose.
– Keep a firm grip on the handles/grips.
– Maintain and lubricate the product in accordance with these
instructions.
SAFETY INSTRUCTIONS FOR USING THE HOSE
Read all the instructions and safety instructions carefully before assembly
and use.
• Hold the hose as straight as possible when working to ensure
maximum air speed.
• Never point the hose at people or animals, or at objects outside the
work area.
• Never attempt to release the hose when the product is in use.
• Do not pull the hose to move the product.
• Never point the hose at liquids, flammable or toxic gas, or burning
or glowing objects.
• Do not attempt to vacuum objects that are larger than the opening
on the hose.
• If the hose gets blocked, switch off the product and clear the hose.
• Keep the hose away from the muffler on the engine.
• Break up compact waste with a rake.
• If the ground is very dry and this causes dust, wet the surface before
using the product.
SAFETY INSTRUCTIONS FOR BAG
• Check that the ventilation hole on the bag is not blocked if air flows
out through intake opening. Check whether the bag is full.
30
• Switch off the product and check if the connection to the bag is
blocked.
• Switch off the product before fitting/removing the bag.
• Before starting the product again, check that the bag is closed.
• Never open the bag when the product is in use.
• Do not hit the bag with a utensil to empty or clean it.
SYMBOLS
105 Guaranteed sound power level.
Approved in accordance with the relevant directives.
Recycle discarded product in accordance with local
regulations.
See page 4 for the following symbols
A. IMPORTANT: Read the instructions.
B. Keep onlookers at a safe distance.
C. Do not touch moving parts until they have completely stopped.
D. Toxic gas – only use outdoors.
E. Wear safety gloves. Keep your hands and feet away from moving
parts – risk of personal injury.
F. IMPORTANT: Release the spark plug lead from the spark plug before
cleaning, maintenance and/or repairs.
G. WARNING: The engine gets hot when in use – risk of burn injury.
H. IMPORTANT: Wear safety glasses and ear protection.
FIG. 1

TECHNICAL DATA

Engine type
Displacement
Output
Speed, no load
Fuel tank capacity
Oil tank capacity
Engine oil
Moving speed
Catcher volume
Suction width
Suction height
Air speed vacuum mode
Air speed blower mode
Four stroke
140 cm³
2 kW
2800 rpm
0.8 l
0.47 l
10W-30
3.4 km/h
150 l
580 mm
15–60 mm
26 m/s
43 m/s