Intended Purpose Of The Board - Addi-Data ADDINUM PA 1500 Technical Description

PA 1500
1

INTENDED PURPOSE OF THE BOARD

The board PA 1500 is the interface between an industrial process and a
personal computer (PC).
The board PA 1500 must be inserted in a PC with a free ISA slots, which is
used as electrical equipment for measurement, control and laboratory use as
defined in the norm IEC 61010-1.
The PC is to comply with the norm IEC61326 for measurement, control and
laboratory use and with the specifications for EMC protection.
Products complying with these specifications bear the CE mark.
Data exchange between the PA 1500 board and the peripheral is to occur
through a shielded cable. This cable must be connected to the 37-pin SUB-D
male connector of the PA 1500 board
The board has 16 inputs and 16 output channels for processing 24 V digital
signals.
An external 24 V supply voltage is necessary to run the output channels.
The screw terminal board PX 901 and the relay board PX 8500 allow to
connect the 24 V supply voltage through a shielded cable
The use of the board PA 1500 in combination with external screw terminal
or relay boards is to occur in a closed switch cabinet.
The installation is to be effected competently. Check the shielding
capacity of the PC housing and of the cable prior to putting the device into
operation.
The connection with our standard cable ST010 complies with the following
specifications:
metallized plastic hoods
-
shielded cable
-
cable shield folded back and firmly screwed to the connector housing.
-
Please only use the board:
in conditions providing absolute security
-
in a closed housing which is adequately protected against environmental
-
influences
with the accessories we recommend
-
The use of the board according to its intended purpose includes observing
all advises given in this manual and in the safety leaflet.
Uses beyond these specifications are not allowed. The manufacturer is not
liable for any damages which would result from the non-observance of this
clause.
Intended purpose of the board
9