I_Pa1500_Setboardintroutinewin16 - Addi-Data ADDINUM PA 1500 Technical Description

Standard software
i
IMPORTANT!
This function is only available for Windows 3.1 and Windows 3.11
3)

i_PA1500_SetBoardIntRoutineWin16 (..)

Syntax:
<Return value> = i_PA1500_SetBoardIntRoutineWin16
Parameters:
- Input:
BYTE b_BoardHandle
BYTE b_InterruptNbr
VOID v_FunctionName
- Output:
No output signal has occurred
Task:
This function must be called up for each PA 1500 on which an interrupt
action is to be enabled.
First calling (first board):
the user interrupt routine is installed
-
interrupts are enabled.
-
If you operate several boards PA 1500 which have to react to interrupts, call
up the function as often as you operate boards PA 1500. The variable
v_FunctionName is only relevant for the first calling.
From the second call of the function (next board):
interrupts are allowed.
-
Interrupt
The user interrupt routine is called up by the system when an interrupt is
generated.
An interrupt is generated when:
the counter/timer has run down
-
an event is generated
-
the watchdog has run down
-
48
(BYTE b_BoardHandle,
BYTE b_InterruptNbr,
VOID v_FunctionName
(BYTE b_BoardHandle,
BYTE b_InterruptMask,
BYTE InputChannelNbr))
Handle of board PA 1500
PA 1500 interrupt number
(3, 5, 10, 11, 12, 14 or 15)
Name of the user interrupt routine
PA 1500