I_Pa1500_Startcounter3; I_Pa1500_Stoptimercounter1 - Addi-Data ADDINUM PA 1500 Technical Description

Standard software
6)

i_PA1500_StartCounter3 (...)

Syntax:
<Return value> = i_PA1500_StartCounter3 (BYTE b_BoardHandle)
Parameters:
BYTE b_BoardHandle
Task:
Starts the third counter. Please initialise it previously with the function
"i_PA1500_InitWatchdogCounter3".
Return value:
0: No error
-1: The handle parameter of the board is wrong
-2: Counter has not been initialised
-3: The counter/watchdog has been initialised as a watchdog.
"i_PA1500_InitWatchdogCounter3"
7)

i_PA1500_StopTimerCounter1 (...)

Syntax:
<Return value> = i_PA1500_StopTimerCounter1 (BYTE b_BoardHandle)
Parameters:
BYTE b_BoardHandle
Task:
Stops the first counter/timer. The timer counting value is freezed
It has the same influence as a hardware gate.
Input
Clock
Timer
Software
Gate
i_PA1500_StartTimerCounter1 (..)
i_PA1500_StartTimerCounter1 (..)
Return value:
0: No error
-1: The handle parameter of the board is wrong
-2: The counter or timer has not been initialised.
Please use function "i_PA1500_InitTimerCounter1"
76
Handle of the PA 1500
Handle of the PA 1500
i_PA1500_StopTimerCounter1 (..)
PA 1500