Fig. 7-2: Selecting A New Board - Addi-Data ADDINUM PA 1500 Technical Description

PA 1500 Software
Insert:
When you want to insert a new board, click on "Insert". The following
dialog window appears:

Fig. 7-2: Selecting a new board

All boards you can register are listed on the left. Select the wished board.
(The corresponding line is highlighted).
On the right you can read technical information about the board(s).
Activate with "OK"; You come back to the former screen.
Clear:
You can delete the registration of a board. Select the board to be deleted and
click on "Clear".
Set:
Sets the parametered board configuration. The configuration should be set
before you save it.
Cancel:
Reactivates the former parameters of the saved configuration.
Default:
Sets the standard parameters of the board.
More information (not available for the boards with ADDIPACK)
You can change the board specific parameters like the identifier string, the
COM number, the operating mode of a communication board, etc...
If your board does not support these information, you cannot activate this button.
ADDIDriver Board Manager (only for the boards with ADDIPACK):
Under Edit/ADDIDriver Board Manager you can check or change the
current settings of the board set through the ADDEVICE Manager.
ADDevice Manager starts and displays a list of all resources available for
the virtual board.
Save:
Saves the parameters and registers the board.
25