Seco EASYSHRINK 15 Operating Instructions Manual page 2

Dear Customer,
We thank you for having purchased an Easyshrink
This induction shrinking device will offer you a lot of advantages:
- automatic* or programming heating cycles
- optimised cycles to shrink-grip and shrink-release tools
- localized and homogeneous heating of the clamping area
- minimal energy consumption
fast cooling of the tool and the toolholder
- clamping of carbide, HSS and steel tool shanks
These operating instructions will give you all necessary information to use this device in the best way.
Should you need further clarifications, our sales-team stays at your full disposal.
Your Partner,
Seco Tools AB.
*Designed for Seco's toolholders, to be validated for other brands.
Provisions of warranty
If your product proves to be defective, although it has been used properly (in accordance with this written Operating
instructions manual), during a period of 24 months from the date of invoicing, this product will be repaired or replaced (at
Seco's option), free of charge.
This warranty covers the material defects. Any defect that occurs due to mishandling that is not mentioned in this Operating
instructions manual, or due to an improper maintenance, etc. is not covered. Seco's sole liability is limited to repairing or
replacing the product. Any liability for indirect or consequential loss or damage of any kind incurred or suffered by the
customer due to a defect of the product is excluded.
15 shrinking device.
®
2