Table of Contents
Advertisement
2.6.
Power supply
The Easyshrink
device is meant to be supplied with power according to these
®
specifications:
AC 3x400V + PE/ 16A/ 50-60 Hz.
A 3,5 meter cable is supplied.
Please install the appropriate male and female plugs to connect the device to your electrical network and make sure the proper
tension is delivered between each pin.
Note: A transformer for USA or Canadian voltages is available
as an optional accessory. Please contact your Seco
representative.
10
Name of
Designation
the pin
of the pin
L1
Phase L1
L2
Phase L2
L3
Phase L3
PE
Ground
Measure between the
pins
PE → L1
PE → L2
PE → L3
L1 → L2
L1 → L3
L2 → L3
Colour of the
wire
brown
black or grey
black
green & yellow
Tension in V
230
230
230
400
400
400
Advertisement
Table of Contents
