Schedules
13.11 Assigning units
Units can be assigned to schedules via the Assign units page. The
settings in the schedules (e.g. operating mode at specific times) are then
valid for the assigned units.
If units are assigned to a schedule, the settings defined for the schedule
apply for the units. Settings that are made for the units via the page Basic
settings are no longer valid. If a schedule is active, the settings can be
changed via the central controller, ARC or IRC. These settings remain
active until the next time the schedule is changed. If a period ends, the
units are switched off. If a period starts, the settings defined there are
applied.
13.11.1 Overview Assign units
Description
Header
...
Footer
Select units area
Time program selection dropdown list
32
To call up the page Assign units:
▶ Dashboard >
Schedules > Assign units
-or-
▶ Header >
>
Schedules > Assign units
9 "Operating units"
8.2 "Header"
8.1 "Dashboard"
Description/References
• Navigation element, on every page at the top edge of the screen
8.2 "Header"
13.11.8 "Closing Assigning units"
• Display of outside temperature, date and time
8.4 "Footer"
• Overview of units and groups
13.11.2 "Overview of units and groups"
13.11.4 "Assigning units to a schedule"
13.11.7 "Changing the name of a unit"
• Select a schedule.
13.11.3 "Selecting a schedule"
• Display/hide units.
13.11.2 "Overview of units and groups"
Air Center Control – 6720892123 (2020/06)