Assign To Schedule; New Schedule; Closing The Advanced Settings - Bosch Air Center Control User Manual

Disabling operating mode
The following operating modes can be disabled for pre-selected units in
the Block operating mode area of the Lock Manager:
• Heating mode only: the unit is blocked in Heating mode. Another
operating mode cannot be set.
• Cooling mode only: the unit is blocked in Cooling mode only.
Another operating mode cannot be set.
To lock one of the operating modes for selected units:
▶ Select .
Dropdown list is expanded.
▶ Select operating mode to be disabled.
The selected operating mode is highlighted in blue and applied.
appears in the area View of units on the Basic settings page next to
the selected units.
To unlock an operating mode:
▶ Select .
Dropdown list is expanded.
▶ Select Off.
The locked operating mode is unlocked.
View of units on the Basic settings page next to the selected units.
 9.4 "Selecting and deselecting units for editing"
Locking the variable refrigerant flow infra-red remote control
The variable refrigerant flow infra-red remote control ARC C IR can be
used to adjust units independently of the central controller.
The infra-red remote control can be disabled for pre-selected units in the
Lock IRC area of the Lock Manager.
To disable use of the infra-red remote control for selected units:
▶ Select .
appears. Infra-red remote control is locked.
appears in the area View of units on the Basic settings page next
to the selected units.
To cancel the remote control interlock:
▶ Select .
appears. Settings can be made via the infra-red remote
control.
 9.4 "Selecting and deselecting units for editing"
 9.3 "Display of units"
Locking the variable refrigerant flow wired remote control
The variable refrigerant flow wired remote control ARC can be used to
adjust units independently of the central controller.
The ARC can be disabled for pre-selected units in the Lock ARC area of
the Lock Manager.
To disable the ARC for selected units:
▶ Select .
appears. ARC is locked.
appears in the area View of units on the Basic settings page next
to the selected units.
To unlock the ARC:
▶ Select .
appears. Settings can be made via the ARC.
 9.4 "Selecting and deselecting units for editing"
 9.3 "Display of units"
Air Center Control – 6720892123 (2020/06)
Locking the fan settings
The set fan speed can be locked for pre-selected units in the Lock fan
settings area of the Lock Manager.
To lock the fan speed for selected units:
▶ Select
To cancel the interlock of the set fan speed:
▶ Select
 9.4 "Selecting and deselecting units for editing"
 9.3 "Display of units"

10.2.3 Assign to schedule

In the Assign to schedule menu item, the Assign units page can be
disappears in the area
called up. The units previously selected on the Basic settings page are
already marked and can be assigned to a schedule.
 13.11 "Assigning units"
 9.4 "Selecting and deselecting units for editing"

10.2.4 New schedule

In the New schedule menu item, the Schedules page can be called up.
 13 "Schedules"
 13.2 "Creating a time program"

10.2.5 Closing the advanced settings

To close the advanced settings:
▶ Select
.
appears. The fan speed set for the unit(s) has been locked.
appears in the area View of units on the Basic settings page next
to the selected units.
.
appears. The fan speed can be adjusted for the selected units.
.
The advanced settings have been closed.
Settings sidebar
19